Sadly, when it comes to the construction industry; all I see is blame; there is too much friction and things are not working.
Just like the cladding and fires, waterproofing and our cracking buildings for example where things aren’t quite right, I think passive fire protection is one area that could use some leadership and a shift in paradigm.
Lack of design and planning, coupled with an focus on building certification has lead to large numbers of defective installations due to a lack of understanding of the concept of the passive fire penetration system.
In Australia, we have the NCC/BCA which outline the technical design provisions for a compliant building.
Some of us know AS3000, the primary design standard used for NCC/BCA compliance; this is our wiring rules for electrical installations. We all respect those electrical contractors who are trained to design and install our cabling and deal with the hazards of live electricity.
The NCC/ BCA tend to deal with compartment barriers separately; that is, we have fire walls with an FRL and Smoke Walls with poorly defined and qualitative requirements. We do not really have a fire and smoke wall, ceiling….
The method used to achieve the required fire resistance in Modular construction needs to be considered, in particular for floor separation between levels and resistance to impact damage.
The most basic way to understand passive fire protection is that we install on-site in the same manner that a successfully fire-tested SYSTEM was installed.
Plastics are well known to us all, and chemically speaking they are man-made materials derived from petrochemicals. Read the full article today!
Download The Full Article Here Introduction It feels like yesterday, but most of us remember
Did you know Australia was the first country to commercialise the use of plastic pipes
It was around 30 years ago when I first heard the word “intumescent”. Little did
They say that time flies. Well, that saying holds true to me personally when it
Australian Building Regulations have been slowly tightening up to improve the energy efficiency of our
Passive fire compartments, fire containment barriers and separate fire cells (or zones) are well known
Building Regulations historically have changed following public disdain for multiple fatality tragedies and typically in
The NCC in Australia has made it clear; fire testing needs to be current and
Fire rated access panels are often required to be installed into fire rated walls, fire rated service shafts, and of course fire rated ceilings. They allow for convenient access to services such as shut of valves for example which look much more aesthetically when inside an access panel.
Fire stopping works are being closely scrutinised now. We have all heard all the fuss
Shame, shame, shame, shame. Non-conforming building products – the system is failing us all dismally.
As I sit at my trusty laptop, on Sunday morning, watching the sun rise through
NCC2022 is all but here; do you know what all the fuss is about and
Control, movement or expansion joints are an important part of good building practice. They are
Holy shit, this whole passive fire protection is more than just holes in walls! This
It was around 30 years ago when I first heard the word “intumescent”. Little did
Everyone knows things are changing but no one seems to know why. I am being
There is a lot of confusion about so called “fire rated boards” and I think
There is more to compliance than just whacking a fire collar on a plastic pipe
We can thank Fredrick Grinnell all those years ago, as he is credited for being
We are constantly looking for ways to improve our methods of service delivery. We would really appreciate it if you could rate your experience {or/at our website/premises} today.
Trafalgar takes privacy seriously, so any information that you provide here will not be used for marketing purposes, and it will not be shared with third parties.
